傳統的壓痕機是不是只能淘汰，只能人工操作?。?/h1> 發布人：管理者 發布時間：2021-04-07
你了解的手動壓痕機是不是還停留在傳統人工放料的環節？新設備出來發現雖然全自動但是價格太貴！老設備也只能擱置！
手動壓痕機
自動壓痕機
適用范圍：適用于各類坑紙、瓦楞、膠片、海棉、灰板、吊牌的模切加工。
產品簡介：
1.采用PLC控制，觸摸屏人機界面，參數式設置及故障顯示；
2.前檔及邊檔可依紙張版面大小自由調整、調整方便；
3.送紙臺備有補臺裝置，可連續操作不停機；
4.光電多重檢視，入紙收紙均采用真空吸盤，無壓痕；
5.收紙臺備有板車，操作容易、省力，亦可加裝插紙計算器；
6.飛達部有軌道裝置，作版時可自由分開，方便作版；
Automatic die cutting machine:
Scope of application: suitable for all kinds of pit paper, corrugated, film, sponge, ash board, tag die cutting processing.
Product introduction:
1. PLC control, touch screen interface, parameter setting and fault display;
2. The front and side files can be adjusted freely according to the size of the paper layout for convenient adjustment;
3. The paper feeding table is equipped with a replenishing device, which can operate continuously without stopping the machine;
4. Photoelectric multiple inspection, paper in and paper out all adopt vacuum sucker, no indentation;
5. The paper receiving platform is equipped with a pallet, which is easy to operate and labor-saving, and can also be equipped with a paper calculator;
6. Feida part of the track device, version can be separated freely, convenient for version;
那么問題來了！
1：手動的可以清廢、切線，但是速度慢、不安全，還需要養人工，一臺機器一個人
2：自動的可以切線確不方便清廢，還得養人工，速度是上去了，但總歸在人操作的哪部分就是慢下來了
皇盈自動化設備有限公司就在全自動模切很貴，充分利用原有壓痕機不浪費的基礎上研發了加裝機械手的裝置，上料、下料、清廢等一系列功能全有
智能模切壓痕清廢機械手
適用范圍：各類大小規格的紙張的模切，包括且不限于 80g書紙、120g~157g雙銅 紙、200 g~500g白板紙、600g~1200g灰板紙、瓦楞紙、0.2MM以上的膠片等。
產品簡介：
1.采用PLC控制，觸摸屏人機界面，參數式設置及故障顯示；
2.推規使用伺服電機，精度+/－0.2mm；
3.調試只需十分鐘,操作安全簡單，單人可同時看4-5臺機；
4.上料、模切、清廢、收料，四工位三軸設計，節省人力及存儲空間；
5.最大速度達1500-1800張/小時；
Intelligent die cutting indentation scrapping manipulator
Scope of application:
Suitable for die-cutting of paper of various specifications, including but not limited to 80g book paper, 120g-157g double copper paper, 200g-500g white board paper, 600g-1200g grey board paper, corrugated paper and film sheets (over 0.2mm).
Product introduction:
Using PLC control, touch screen and man-machine interface, with parameter setting and fault display.
b. Using servo motor, the error range is +/-0.2mm.
c. It needs only 10 minutes to set up the machine. The operation is safe and simple. One person can operate 4-5 sets of machines at the same time.
d. Paper loading, die cutting, waste chip removal and material collection achieve three-axis design, which saves labor cost and space.
e. The maximum working speed can be up to 1500-1800 pcs of paper per hour.
壓痕模切清廢機械手
單機智能壓痕清廢機械手詳圖
多工位智能壓痕清廢機械手詳圖
多工位智能壓痕清廢機械手詳圖
您說這樣的智能壓痕清廢模切機械手實用不實用？？
皇盈為廣大紙類印后客戶提供的壓痕機清廢機械手優質方案，希望能充分解決大家的人工，效率等問題，實現雙贏的目的！
在線客服